EK power take-off

The power take-off is an external shaft journal for transferring power from the engine to external accessories. The EK power take-off is fitted between the engine and gearbox and is driven by the engine. Normally, the power take-off is not engaged.

You can control the engine speed to the EK power take-off by pressing + or - on the cruise control switch.

IMPORTANT!

The engine must be shut down before engaging the  power take-off.

Engaging

  1. Switch off the engine.
  2. Put the gear into neutral.
  3. Set the key to drive position.
  4. Activate the switch.
  5. Start the engine.

Disengaging

  1. Make sure the power take-off is not loaded.
  2. Deactivate the switch.

EK power take-off switch