07662-001
Preset engine speed
Selection
Description
With this function, the engine speed can be increased to a preset value with different conditions, for example with a power take-off engaged, as shown in the example below.
Example applications:
- Preparing the engine for platform tipping.
- Preparing the engine for crane raising.
Suitable for applications such as:
- Tipper trucks
- Crane trucks
Function
To be able to receive the signals outside the cab, it is suitable to connect a cable harness for bodywork functions to harness-to-harness connector C494. The cable harness is distributed to the 3 DIN harness-to-harness connectors C486, C487 and C488.
The following logic diagram makes it possible to increase the engine speed to a preset value. When the EG power take-off is connected engine speed 1 will be activated.
Note: The EG power take-off shown in this logic diagram is only an example. All types of power take-offs can be connected.
The Engine speed 1 parameter must be adjusted in Scania’s programming tool for bodybuilders (SDP3), as shown in the illustration below.
- Type of Control: Fixed value.
- Other setting values depend on the needs of the bodywork.
